> ## Content Index
> Fetch the complete content index at: https://research-pop.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Tianjin University Team Separates Cracking and Aromatization in Time to Convert Waste Plastics
- URL: https://research-pop.com/tianjin-university-team-separates-cracking-and-aromatization-in-time-to-convert-waste-plastics/
- Published: 2026-11-15T22:59:57.000Z
- Updated: 2026-11-15T22:59:57.000Z
- Author: ResearchPOP

![](https://storage.ghost.io/c/7c/5e/7c5e0911-739b-4a35-94eb-3e810bf78ba7/content/images/2026/11/Screenshot-2026-11-15-at-23.31.18.png)

## At a glance

Researchers led by Donglong Fu and Jinlong Gong report a tandem-zeolite system that coordinates polymer cracking and aromatic formation within one reactor. A self-pillared pentasil zeolite, SPP, cracks long polymer chains at lower temperatures, producing mobile olefin-rich intermediates. A modified MFI zeolite, MFI-m, becomes more active for aromatization as the temperature rises.

An equal-mass mixture of post-consumer HDPE, LDPE, PP and PS gave a 60.3 wt% aromatic yield at 95.3% conversion after 0.5 h at 380 °C. The study also reports sustained performance over 40 regeneration cycles.

## Background

Zeolites contain confined channels that can guide hydrocarbon cyclization and aromatic formation. Long polymer chains, however, cannot readily enter these micropores. They first need to break into smaller molecules at accessible sites outside the channels.

This creates two connected catalytic tasks: deconstruct the polymer and convert the resulting fragments into aromatics. When both reactions occur within the same kinetic window, intermediate production and consumption remain closely coupled.

The researchers address this problem by combining zeolites with different temperature-dependent activities. SPP provides accessible cracking sites, while MFI-m converts the smaller intermediates within its microporous structure. The design allows each function to dominate at a different stage of the reaction.

## Research question

Can polymer cracking and aromatization be separated in time within a one-pot system? How do the activity, proportion and proximity of the two zeolites determine aromatic production?

## Inside the study

### Designing two successive catalytic windows

![](https://storage.ghost.io/c/7c/5e/7c5e0911-739b-4a35-94eb-3e810bf78ba7/content/images/2026/11/Screenshot-2026-11-15-at-23.31.30.png)

Figure 1 introduces the proposed sequence and compares it with approaches that use co-reactants or separate reactors.

In the tandem system, SPP begins converting polymer chains into smaller, olefin-rich molecules at lower temperature. As the temperature increases, MFI-m becomes more active for aromatic formation.

The two catalysts remain in the same reactor. Their different kinetic responses allow an intermediate pool to form before the aromatization component reaches its strongest activity.

### Converting post-consumer plastics and regenerating the catalysts

![](https://storage.ghost.io/c/7c/5e/7c5e0911-739b-4a35-94eb-3e810bf78ba7/content/images/2026/11/Screenshot-2026-11-15-at-23.31.40.png)

Figure 2 evaluates the tandem system on post-consumer feeds. For an HDPE bottle, SPP + MFI-m reached 59.6% aromatic selectivity at 96.7% conversion. MFI-m alone gave 37.9% aromatic selectivity.

An equal-mass mixture of HDPE, LDPE, PP and PS produced a 60.3 wt% aromatic yield at 95.3% conversion within 0.5 h at 380 °C. The aromatic space-time yield reached 11 g gcat⁻¹ h⁻¹, compared with values of 5 g gcat⁻¹ h⁻¹ or lower in the paper’s comparison.

Regeneration experiments followed the catalyst through 40 cycles. After this sequence, conversion remained approximately 98% and aromatic yield approximately 56%.

### Establishing the separate kinetic roles

![](https://storage.ghost.io/c/7c/5e/7c5e0911-739b-4a35-94eb-3e810bf78ba7/content/images/2026/11/Screenshot-2026-11-15-at-23.31.57.png)

Figure 3 compares the temperature dependence of cracking and aromatization. SPP converted 51.0% of HDPE at 290 °C and 75.6% at 320 °C, whereas MFI-m remained near 25% conversion under the same conditions.

The behaviour of the model intermediate 1-octene shows the complementary role of MFI-m. Its aromatic yield increased from 6.6% at 290 °C to 40.9% at 380 °C. A staged experiment, in which liquid intermediates generated over SPP were subsequently treated over MFI-m, gave a 56.9% aromatic yield.

Catalyst proportion and placement also affected performance. The highest yield occurred at an SPP:MFI-m mass ratio of 1:1\. Changing from a fully mixed arrangement to macroscopic separation reduced aromatic yield from 57.6% to approximately 36%.

These experiments connect temporal coordination with efficient intermediate transfer: the catalysts perform their main functions at different stages, but still benefit from close physical proximity.

### Following polymer fragmentation and aromatic formation

![](https://storage.ghost.io/c/7c/5e/7c5e0911-739b-4a35-94eb-3e810bf78ba7/content/images/2026/11/Screenshot-2026-11-15-at-23.32.16.png)

Figure 4 examines the molecular sequence using residue analysis and neutron scattering. The observations support what the authors describe as processive-like cracking over SPP: small, olefin-rich fragments are released while much of the remaining polymer retains a relatively high molecular weight.

The authors associate this behaviour with SPP’s accessible external acid sites and hierarchical porosity. These features allow long chains to reach cracking sites and the resulting smaller molecules to move towards the second catalyst.

For MFI-m, the proposed pathway involves neighbouring Brønsted and Lewis acid functions. The authors connect these functions with olefin cyclization and the reactivation of alkane by-products, helping channel intermediates towards aromatics.

### Modelling the process at larger scale

![](https://storage.ghost.io/c/7c/5e/7c5e0911-739b-4a35-94eb-3e810bf78ba7/content/images/2026/11/Screenshot-2026-11-15-at-23.32.25.png)

Figure 5 presents techno-economic and life-cycle calculations for a plant processing 200 kt of mixed waste plastic annually. Under the model assumptions, annual aromatic production reaches 121.3 kt.

The estimated minimum aromatic selling price is US$396 t⁻¹, with an annual net profit of US$52.3 million and a payback period of 5.8 years.

The life-cycle model gives emissions of 1.02 kg CO₂-equivalent per kilogram of plastic processed. This is approximately 26% below the fossil-based comparison route and 66% below incineration within the assessment’s boundaries. These results describe the modelled process rather than an operating commercial facility.

## Summary and outlook

The study uses complementary temperature-dependent activities to coordinate two stages of plastic conversion. SPP first releases mobile olefin-rich fragments, and MFI-m subsequently converts those intermediates into aromatics.

Temperature-dependent tests, staged reactions and catalyst-placement experiments support this sequence. The post-consumer feed experiments demonstrate rapid aromatic production, while repeated regeneration maintains substantial conversion and yield. Process modelling then evaluates the economic and environmental implications under a defined larger-scale scenario.

## About the researchers

Xinquan Xu is the first author. Donglong Fu and Jinlong Gong are the corresponding authors.

The other authors are Yuhang Ding, Guodong Qi, Ruichen Wang, Lingyu Bai, Chaojie Guo, Ruoyi Gao, Guanqing Feng, Yijing Feng, Sai Chen, Zhi-Jian Zhao and Chunlei Pei.

The collaboration includes Tianjin University and its associated laboratories, Haihe Laboratory of Sustainable Chemical Transformations, the Chinese Academy of Sciences, the University of Chinese Academy of Sciences, Zhejiang Institute of Tianjin University Ningbo and Tianjin Normal University.

## Original research

Xinquan Xu; Yuhang Ding; Guodong Qi; Ruichen Wang; Lingyu Bai; Chaojie Guo; Ruoyi Gao; Guanqing Feng; Yijing Feng; Sai Chen; Zhi-Jian Zhao; Chunlei Pei; Donglong Fu; Jinlong Gong. “Selective aromatization of polyolefins by temporal decoupling from cracking.” *Nature Communications*. Published online 13 November 2026.

[Read the original article](https://doi.org/10.1038/s41467-026-79441-5?ref=research-pop.com)

---

## Research POP Notes

This article reflects the independent interpretation of the Research POP team and does not represent the views of the authors, their institutions or the journal. If you identify any inaccuracies or have concerns regarding the content, figures or attribution, please contact us at [team.researchpop@gmail.com](mailto:team.researchpop@gmail.com). We will review the matter promptly and make corrections or remove the relevant material where appropriate.